|
|
 |
|
In this system the Y1 and Y2 axes operate as an independent double acting
hydraulic system. Both axes share the same oil supply but the flow to the valves
as well as true position(s) of the ram are entirely and separately controlled by
computer command. The CNC reads the ram position from independent linear
encoders while monitoring and adjusting the proportional valves, producing a
double-closed loop system. By using this principle as well as the integration of
the latest technologies, we have succeeded in developing a user-friendly,
service-friendly, fast and accurate system. Accuracy is further ensured by
mounting the linear encoders on a C-frame connected to the bed, rather than
directly on the side frames, so that deflection of the side frame and loads do
not affect positioning. Accuracy is guaranteed up to 0.01 mm.
|
|
|
|
|
|
|
|
- CNC -control ROBOSOFT SYNCHRO
- electronic-hydraulic levelling and depth stop
setting
- 3 axes
- automatic compensation of the sideframe-deflection
by means of table reference measuring scales
- CNC -control ROBOSOFT ATS 550
- accurate backgauge on ballscrews, AC driven, high
speed 120 mm/sec, stroke according to capacity including 2 fingerblocks
manually adjustable in width and height (stroke 130 mm)
- footpedal control
- filled oiltank
- prepared for HACO -style tooling exception 400 kN:
ram machined to use system style tooling
- operation, programming and maintenance manual
|
|
|
|
|
|
|
- X-axis: backgauge programmable in 0.1 mm
- Y1-axis - Y2-axis: hydraulic axes, depth stop setting in 0.01 mm
- maximum capacity of 8 programmable, 80 steps
- programmable depth Y1 - Y2
- programmable speed change-over point
- programmable upper dead point
- programmable backgauge positioning
|
 |
|
|
|
|
|
|
|
- backgauge stroke increased to 1000 mm
- intermediate top cool clamping with anti-deflection wedges for system
tooling
- anti deflection tables to compensate beam deformation
- hydraulic tool-clamping
- grooven in the table for single V-dies
- tooling
|
 |
|
|
|
| See
others :: Euromaster
| Synchromaster | PPM
| Minimaster |
|
|
